Larger picture

BIONET Salt Electrolysis + Ionization

from 1.623 € 1.217 €
In slightly salty water (between 2 and 30 gr NaCl/ liter) generates hipoclorite automatically for disinfection of water. It incorporates the ionization of Copper and Silver in the same electronic box , the principle of operation is based on the capacity of the copper (Cu++) and the silver (Ag+) as floculant and antibacterial agents that utilized jointly with the saline electrolysis they achieve an integral water processing of chlorination-floculación without chemical products.
Anti legionnaire's disease system.

swimming pool chlorinatorsBIO16: Electrolysis 16 g/h and 2 electrodes Cu/Ag for pools up to 65 m³
salt water pool chlorinatorBIO22: Electrolysis 22 g/h and 4 electrodes Cu/Ag for pools up to 110 m³
salt electrolysis for pool water treatmentBIO33: Electrolysis 33 g/h and 6 electrodes Cu/Ag for pools up to 200 m³
swimming pool chlorinatorsBIO50: Electrolysis 50 g/h and 8 electrodes Cu/Ag for pools up to 300 m³

Options (both recommended):
• Measurement and control of pH of the water (electromechanical pump + probe)
• Measurement and control of REDOX (Measurement of oxidation of pool water and controls functionality of salt electrolysis)

Request info/quote

Salt electrolysis
Salt electrolysis systems generate chlorine from the common salt disolved in the water. The necessary salt for their operation should be added to the pool in a concentration of 3-4 Kg/m3. The chlorine generated destroys the organic matter and present pathogens in the water, being transformed again in sodium chloride (common salt). The products break down, they act and they are regenerated again.

Cu/Ag Ionization
Jointly a Cu-Ag IONIZER enormously powers the efficacy of the salt electrolysis, permitting that the antibacterial and algicidepower of the Cu-Ag ionization system be completed by the hipoclorite generation of the electrolysis system, acting jointly in a free and natural cycle without the addition of chemical products.