ELECRO InLine+ Titanium Pool Heater
from 690 €
This swimming pool heater come fully equipped and pre-wired including super sensitive flow switch, which allows safe coupling to above ground splasher pools.
The titanium version is suitable for heating salt water pools and extremely endurable – it is made to last.
The digital control with priority of heating will allow you to let the heater determine the water temperature and control the pool pump.
The swimming pool heater comes in 8 different sizes (single-phase, mixed or 3-phase models), your choice depend on the climate you are living in and the volume of your pool.
| Heating elements |
Pure Titanium. Watts Density <9>18 Max WCM² |
| Flow tube |
Pure Titanium |
| Control thermostat |
0 - 40ºC |
| Safety thermostat |
50ºC manual reset |
| Water Connections |
32 mm or 50 mm |
| Minimum flow requirement |
1.000 ltr/hr |
| Maximum flow requirement |
13.000 ltr/hr |
| Control housing |
ABS Fire retardant to VO rating |
| Digital control |
With priority of heating |
The electric swimming pool heater does not make any noise, or fumes or any other unpleasant waste.
Low stress, heating resistor(s) with large surface area to enable safe operation when coupled to low volume pumps or high debris systems (1000 liter/hour is enough to make this heater work). Therefore equally suitable for coupling to small volume above ground pools or large volume in ground pools
The pool heaters virtually need no maintenance what so ever. All component parts are “on site serviceable”
The electric pool heater is compact and will fit anywhere. The installation process is very simple.
The swimming pool heaters come fully equipped and pre-wired including super sensitive flow switch, which allows safe coupling to above ground splasher pools.
